Electrical Power Engineer (for USA)

Resume posted by emmanouilpsyridis in Engineering.

Desired position type: Full-Time
Location: Berlin Berlin, Germany

Contact emmanouilpsyridis

Summary

Nationality Greek / German
Electrical Power Engineer with 10 years of experience in various infrastructure projects in Europe, fluent in 4
languages and a lifelong learner; seeking new challenges in the United States in power systems engineering in order to apply my knowledge and experiences in new innovative and ambitious projects. Sponsorship (e.g. H1B-Visa) needed

Education

06.2009-05.2011 Berlin Institute of Technology –Germany Faculty of Electrical Engineering: MSc
• Studies Master of Science electrical engineering
• Specification electrical energy
• Master Thesis: “Development of an Optimum Concept for Streetlight according to the criterion of Object Contrast under the Considerations of Energy efficiency and the Recommendations of DIN-EN13201” (Supervisor: Prof.Dr. S.Völker)

10.2004-05.2009 Berlin Institute of Technology – Germany
Faculty of Electrical Engineering – BSc:
• Studies Bachelor electrical engineering
• Specification electrical energy
• Bachelor Thesis: “Vermeidung der Lagerströme in einer Umrichter gesteuerte Asynchronmaschine“ (Supervisor: Prof.Dr.Habil.Ing. R.Hanitsch)

04.2003-10.2004 Bremen University– Germany
Faculty of Electrical Engineering

10.2000-06.2003 Donau University –Austria/Master
• Studies Master of Advanced Studies in Telematics Management
• Master Thesis :“Industrial communication protocols and recent trends“ (Supervisor Prof.Hadjidiakos)

10.1993-06.1999 TEI Piraeus -Greece
• Studies automation engineering – BSc.
• Thesis: Construction of a SCADA for water level control” (Supervisor Prof.Politis)

Seminars
28.01.2016: Seminar: HOAI (regulation fees for engineers and architects) – Berlin
23-24.05.2012: Stuttgart Seminar: Einführung Entwicklung sicherheitsgerichteter Systeme
21-25-03.2011: Nurnberg Seminar: SIEMENS- SIMATIC TDC Engineering
16-21.3.1998: NTUA- Athens: Seminar “Intelligent systems for automatic control” (16-21.3.98 NTUA-Athens)
9-10.05.1996: TEI PIREAUS: Conference “technologies of Automation”

Experience

05.2019-
SIEMENS AG
Railways Systems Chief engineer – electrical Substation power engineering
• Technical management of the subcontractors
• Editing/Verifying the electrical plans of high and low voltage
• Management of the interconnection plans between the electrical installations

04.2017- 05.2019
SIEMENS AG
Railways Systems engineer – Signaling
• Built and Set up of the ESTAL SA railways Test center in Algiers (Algeria)
• Management test team (10 persons)
• Documentation of the procedures for the test center incl. work flow and fault management

01.04.2012 – 31.03.2017
ICS AG -Berlin (Germany) – Permanent Contract –
• Validates the TCMS System & Subsystems for the passenger rolling stock: BR430, DT5, Talent2, DoSto2010,
SBB, Stand & dynamic.
• Creates tests specifications based on Schematics, System specification and norms
• Creates tests reports based on tests specifications
• Reviews system specifications & documentation,
• Performs commissioning & troubleshooting
• Electrical engineering /Systems engineering

02.2011-03.2012
IPN Brainpower GmbH- Nurnberg (Germany) – Permanent Contract –
• Engineering the measurement systems for HVDC (incl. off-shore Wind Parks)
• Engineering systems for HVDC Protection (Protection Engineering incl. off-shore Wind Parks)
• Creating technical documentation
• Modifying & creating single line electrical Diagrams
• Use of SCADA/HMI system (WinCC)

11.2009-01.2011
Berlin Institute of Technology–Faculty of Light Engineering (Germany) –Internship
Responsible tutor for the assistance of foreign bachelor students at the exercises of „Principles of Electrical machinery fundamentals” and „Electrical Energy Systems”

08.2006-07.2007
Deutsche Bahn International (Germany) –Internship:
Due to my assessment became familiar with
• Simulation software for railways operation,
• EMC studies for overhead transmission lines with Matlab,
• Studies /Calculation of short-circuits

03.2005-09.2005
NAISS GmbH (Germany) –Internship
Became familiar with the use of tool machines

02.2001-02.2003
Amber SA (Greece) – Permanent Contract:
As BSc. Automation Engineer assigned to the service, installation, program of PLCs and SCADAs (on SIEMENS S-5 basis). Customers were concrete companies and other applications for heavy industry, water and energy suppliers, mining, Hellenic navy etc.

09.2001-02.2003:
TEI Piraeus –Internship
Scientific Assistant of the Laboratory of „Automatic Control Systems II

11-2000-02.2001:
Leon Engineering SA – Permanent Contract
Production assistant manager for manufacturing electronic scales

11.1999-11.2000:
Military Service Hellenic Navy
Assistant Radar & Radio Engineer

Skills

  • MS-Office, (good)
  • PLCs
  • SCADA/HMI
  • Clear Quest
  • ClearCase
  • Protection for power systems (e.g. Relays)
  • EPLAN,
  • E3,
  • AutoCAD,
  • ELCAD,
  • Engineering Base
  • ETAP
  • PSCAD
  • SKM
  • MatLAB
  • DOORS
  • KANBAN
  • SAP (basic)

Specialties

    Team management /team player

Spoken Languages

    Greek (native)/ German (fluent)/  English (fluent)/  French (fluent)/  Russian (basic)/  Spanish (basic)